BUZZ T-NUT GUIDE

     BUZZ T-NUT GUIDE

The BUZZ T-NUT Guide was developed to simplify locating the T-NUTS in the Dual Track Channels, when attaching the FOILDRIVE GEN-2 Battery Housing

As the Tracks are not visible when the Battery enclosure in position -Using the transparent  BUZZ T-NUT GUIDE enables the user to position and secure the T-NUTS in any position so that location of the GEN-2  bolts is a breeze.

This eliminates the need to use WING-NUTS that are costly and create unnecessary drag

1. Insert  the FOUR T-Nuts with Battery Bolts attached into the Track Slots and move them to both ends of the two slots - ensuring the small grub screws are at the ends of the tracks

2. Move ONE BOLT to the preferred position - tighten the BOLT to lock the T-Nut in the slot, then tighten the small grub screw (make sure the grub screw is on the OUTSIDE of the Slot and visible)  

3. Locate the BUZZ GUIDE over the Tracks. Locate one slot of the BUZZ GUIDE to the battery bolt  and inert a SECOND BOLT and T-Nut to the other end of the BUZZ GUIDE- tighten the SECOND bolt then the grub screw

4. Repeat Step 3 for T-Nuts 3 and 4, ensuring to tighten respective BOLTS and grub screws

5. Remove all Battery Bolts and Buzz Guide

6. Position GEN 2 Battery Box over tracks and re-insert Battery Bolts to secure the Battery Box.